Extron electronic - PVT RGB MK

Below are all the different types of Extron electronic. Select the device of your choice, to download the manual

Contents

PVT RGB CV MK and PVT RGB MK Installation Guide The PVT RGB CV MK 2 gang and PVT RGB MK 1 gang A V wall plates for Pole Vault Systems can be installed in MK junction boxes To install either of the devices 1 Run the A V input cables CAT 5 5e 6 from the Pole Vault switcher along the raceway or behind the wall to the desired junction box location Two cables A and B are needed for the RGB signals one for composite video 2 Thread the cables through the back of the junction box and out of the front Carefully cut off the terminating RJ 45 connector from each cable Strip the insulator of each cable wire back approximately 0 4 1 1 cm Following the wiring diagram and table below use a Tweeker to press down the spring switch and insert each wire ...